Order Free Samples CLICK HERE
What will I need for my project?
How much do I need?!?
To calculate the number of brick slips you require, you must first calculate the size off the area you are wanting to cover, this is done by using the below formula;
Length of wall (in meters) x Height of wall (in meters) = Total area in Square meters
You have decided to add a feature wall in your kitchen above your worktops, the Length of the wall is 4.5 meters, and you would like it 0.6meters high;
4.5 x 0.6 = 2.7 square meters .
TIP: When calculating large or complex areas for your Brick Tiles it is easier to break them down into smaller sections and then add all the individual areas up at the end.
Once you know the square meterage that you require, you must add 10% onto this figure to allow for any wastage such as breakages and cuts that you may need preform.
Once you have added 10% onto your square meterage, round the number up to the nearest square meter!
Please remember to check the coverage and quantity per box before ordering your required brick slips for example 30 slips per 1/2m2, so you will require two boxes of slips for every square meter you need!Now that we have calculated your brick slips requirements using our free online brick slip calculator, we need to work out the amount of brick slip adhesive and brick slip mortar you will require;
1 bag of Brick slip Adhesive covers approximately 4m2 of brick tiles. 1 bag of Brick slip Mortar covers approximately 3.5m2 of brick slips.
Now you have the exact number of square meters you require, check out our brickslips page for our latest products and offers.
