Fireplace Brick Panels – Brick Slips From Stock https://www.slipsfromstock.com Brick Slips What will you Create? Mon, 11 Mar 2024 16:06:58 +0000 en-GB hourly 1 https://wordpress.org/?v=6.5.5 https://www.slipsfromstock.com/wp-content/uploads/2019/07/buy-brick-slips-small-logo.png Fireplace Brick Panels – Brick Slips From Stock https://www.slipsfromstock.com 32 32 Middleton Blend Fireplace Brick Panels https://www.slipsfromstock.com/product/middleton-blend-fireplace-brick-panels/ Fri, 25 Aug 2023 11:04:07 +0000 https://www.slipsfromstock.com/?post_type=product&p=72735 Middleton Blend Brick Fireplace Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fire Chambers comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive. Fireplace Brick Panels are often referred to as:
  • Log Burner Panels
  • Fireplace Chambers
  • Fireplace Liners
  • Inglenook Panels
  • Fireplace Boards
 ]]> Middleton Blend Brick Fireplace Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fire Chambers comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive. Fireplace Brick Panels are often referred to as:
  • Log Burner Panels
  • Fireplace Chambers
  • Fireplace Liners
  • Inglenook Panels
  • Fireplace Boards
 ]]> Old Coach House Fireplace Brick Panels https://www.slipsfromstock.com/product/old-coach-house-fireplace-chamber/ Wed, 15 Mar 2023 16:11:20 +0000 https://www.slipsfromstock.com/?post_type=product&p=60859 Old Coach House Brick Fireplace Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fire Chambers comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive. Fireplace Brick Panels are often referred to as:
  • Log Burner Panels
  • Fireplace Chambers
  • Fireplace Liners
  • Inglenook Panels
  • Fireplace Boards
 ]]> Old Coach House Brick Fireplace Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fire Chambers comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive. Fireplace Brick Panels are often referred to as:
  • Log Burner Panels
  • Fireplace Chambers
  • Fireplace Liners
  • Inglenook Panels
  • Fireplace Boards
 ]]> Sandalwood Fireplace Brick Panels https://www.slipsfromstock.com/product/sandalwood-fireplace-chamber/ Wed, 15 Mar 2023 08:43:00 +0000 https://www.slipsfromstock.com/?post_type=product&p=59036 Sandalwood Brick Fireplace Brick Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fire Chambers comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive. Fireplace Brick Panels are often referred to as:
  • Log Burner Panels
  • Fireplace Chambers
  • Fireplace Liners
  • Inglenook Panels
  • Fireplace Boards
 ]]> Sandalwood Brick Fireplace Brick Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fire Chambers comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive. Fireplace Brick Panels are often referred to as:
  • Log Burner Panels
  • Fireplace Chambers
  • Fireplace Liners
  • Inglenook Panels
  • Fireplace Boards
 ]]> Normandy Grey Fireplace Brick Panels https://www.slipsfromstock.com/product/normandy-grey-fireplace-chamber/ Mon, 26 Sep 2022 13:50:43 +0000 https://www.slipsfromstock.com/?post_type=product&p=37612 Normandy Grey Brick Fireplace Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as: ]]> Normandy Grey Brick Fireplace Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as: ]]> Keswick Blend Fireplace Brick Panels https://www.slipsfromstock.com/product/keswick-blend-fire-chamber/ Mon, 26 Sep 2022 12:04:45 +0000 https://www.slipsfromstock.com/?post_type=product&p=37605 Keswick Blend Brick Fireplace Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as:  ]]> Keswick Blend Brick Fireplace Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as:  ]]> Audley Antique Fireplace Brick Panels https://www.slipsfromstock.com/product/audley-antique-fire-chamber/ Mon, 26 Sep 2022 10:54:49 +0000 https://www.slipsfromstock.com/?post_type=product&p=37598 Audley Antique Brick Fireplace Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as: ]]> Audley Antique Brick Fireplace Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as: ]]> Old Althorne Fireplace Brick Panels https://www.slipsfromstock.com/product/old-althorne-fire-chamber/ Fri, 23 Sep 2022 16:04:28 +0000 https://www.slipsfromstock.com/?post_type=product&p=37486 Old Althorne Fireplace Brick Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as: ]]> Old Althorne Fireplace Brick Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as: ]]> Toulouse Beige Fireplace Brick Panels https://www.slipsfromstock.com/product/toulouse-beige-fire-chamber/ Fri, 23 Sep 2022 16:02:24 +0000 https://www.slipsfromstock.com/?post_type=product&p=37485 Toulouse Beige Brick Fireplace Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as:  ]]> Toulouse Beige Brick Fireplace Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as:  ]]> Wellbourne Antique Fireplace Brick Panels https://www.slipsfromstock.com/product/wellbourne-antique-fire-chamber/ Fri, 23 Sep 2022 16:00:13 +0000 https://www.slipsfromstock.com/?post_type=product&p=37484 Wellbourne Antique Fireplace Brick Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as: ]]> Wellbourne Antique Fireplace Brick Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as: ]]> London Weathered Yellow Fireplace Brick Panels https://www.slipsfromstock.com/product/london-weathered-yellow-fire-chamber/ Fri, 23 Sep 2022 15:54:58 +0000 https://www.slipsfromstock.com/?post_type=product&p=37482 London Weathered Yellow Fireplace Brick Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as:  ]]> London Weathered Yellow Fireplace Brick Panels Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace. Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar. Our Full Fireplace Chamber Panels comprise of ; 1x Back Panel - 1050mm wide x 1000mm high x 38mm deep 2x Side Panels -450mm wide x 1000mm high x 38mm deep If you would prefer only the back panel please select this from the variations above. We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Benefits

  • Installed in under 1 hour – Most Fireplace Chamber Panel Installations take less than 30 minutes.

  • Less Mess – Our panels are supplied pre-pointed saving you the time and hassle.

  • Intricate Bond patterns available that would not always be possible to complete in situ due to space constraints.

  • Choice of mortars colours – We supply our panels in a choice of either Slip-Point Whiteor Grey

  • Guaranteed for 10 years – Our Fireplace Brick Panels are the highest quality on the market.

  • Bespoke sizes – We can accommodate most bespoke sizes, please contact us should you require any assistance.

Fireplace Brick Panels are often referred to as:  ]]>