Accessories – Brick Slips From Stock https://www.slipsfromstock.com Brick Slips What will you Create? Fri, 12 Jul 2024 12:01:22 +0000 en-GB hourly 1 https://wordpress.org/?v=6.5.5 https://www.slipsfromstock.com/wp-content/uploads/2019/07/buy-brick-slips-small-logo.png Accessories – Brick Slips From Stock https://www.slipsfromstock.com 32 32 External Brick Slip Tracking Cladding Panel https://www.slipsfromstock.com/product/external-brick-slip-cladding-panel/ Fri, 05 Jan 2024 10:59:53 +0000 https://www.slipsfromstock.com/?post_type=product&p=78252 Brick Slip Tracking System for use with Modular, ICF, timber frame and Traditional Build, for large scale applications to speed up the installation of the project. Our A1 Fire rated tracking panels offer excellent fire properties as well as high levels of dimensional stability, Our Brick Slip Tracking panel is used primarily as a fire rated brick slip tracker panel or building fire block board once installed brick slips are then fitted. Used extensively on both steel frame and timber frame structures as well as traditional buildings, Our system can be used with all types of façade solutions, with a fire rating of 60 mins with all of our 12mm panels. Our brick slip tracking panels are 1155mm High x 1200mm Wide x 12mm Thick and are suitable for all of our facing brick slips.

Fixing method

The two fixing methods for our cladding boards are;   This method is suitable for boarding over existing brick and blockwork, and is especially beneficial when the substrate is uneven, as this allows you to create a perfectly level surface for your brick slips.
  • Boards can be mechanically fixed using 36mm stainless steel washer and screws (available at all good DIY stores)
This method is suitable for use on timber framed houses, sheds, garages, SIPS panels. They can be screwed directly to either timber of steel battens.]]> Brick Slip Tracking System for use with Modular, ICF, timber frame and Traditional Build, for large scale applications to speed up the installation of the project. Our A1 Fire rated tracking panels offer excellent fire properties as well as high levels of dimensional stability, Our Brick Slip Tracking panel is used primarily as a fire rated brick slip tracker panel or building fire block board once installed brick slips are then fitted. Used extensively on both steel frame and timber frame structures as well as traditional buildings, Our system can be used with all types of façade solutions, with a fire rating of 60 mins with all of our 12mm panels. Our brick slip tracking panels are 1155mm High x 1200mm Wide x 12mm Thick and are suitable for all of our facing brick slips.

Fixing method

The two fixing methods for our cladding boards are;   This method is suitable for boarding over existing brick and blockwork, and is especially beneficial when the substrate is uneven, as this allows you to create a perfectly level surface for your brick slips.
  • Boards can be mechanically fixed using 36mm stainless steel washer and screws (available at all good DIY stores)
This method is suitable for use on timber framed houses, sheds, garages, SIPS panels. They can be screwed directly to either timber of steel battens.]]> Internal Brick Slip Cladding Panel https://www.slipsfromstock.com/product/internal-brick-slip-cladding-panel/ Wed, 13 Dec 2023 17:50:49 +0000 https://www.slipsfromstock.com/?post_type=product&p=78269 Brick Slip Tracking System for use Internally to speed up the installation of the project whilst adding a 60 minute fire rating. Tried and tested with our brick slips, our A1 Fire rated brick slip tracking panels offer excellent fire properties as well as high levels of dimensional stability, Used extensively in the shopfitting and interior fit out sector as well as the DIY market, these Internal brick slip tracking panels speed up the installation time of our brick slips by over 50%. Our cladding panels are 1155mm High x 1200mm Wide x 8mm Thick

Fixing method

The two fixing methods for our cladding boards are;   This method is suitable for boarding over existing brick and blockwork, and is especially beneficial when the substrate is uneven, as this allows you to create a perfectly level surface for your brick slips.
  • Boards can be mechanically fixed using 36mm stainless steel washer and screws (available at all good DIY stores)
This method is suitable for use on timber framed houses, sheds, garages, SIPS panels. They can be screwed directly to either timber of steel battens. Once installed you can then proceed to install your brick slips ensuring a level and consistent finish throughout.  ]]> Brick Slip Tracking System for use Internally to speed up the installation of the project whilst adding a 60 minute fire rating. Tried and tested with our brick slips, our A1 Fire rated brick slip tracking panels offer excellent fire properties as well as high levels of dimensional stability, Used extensively in the shopfitting and interior fit out sector as well as the DIY market, these Internal brick slip tracking panels speed up the installation time of our brick slips by over 50%. Our cladding panels are 1155mm High x 1200mm Wide x 8mm Thick

Fixing method

The two fixing methods for our cladding boards are;   This method is suitable for boarding over existing brick and blockwork, and is especially beneficial when the substrate is uneven, as this allows you to create a perfectly level surface for your brick slips.
  • Boards can be mechanically fixed using 36mm stainless steel washer and screws (available at all good DIY stores)
This method is suitable for use on timber framed houses, sheds, garages, SIPS panels. They can be screwed directly to either timber of steel battens. Once installed you can then proceed to install your brick slips ensuring a level and consistent finish throughout.  ]]> Slip-Point Brick Slip & Tile Mortar 20Kg Tub – Natural Grey https://www.slipsfromstock.com/product/slip-point-brick-slip-tile-mortar-20kg-tub-natural-grey/ Wed, 07 Sep 2022 08:33:41 +0000 https://www.slipsfromstock.com/?post_type=product&p=36700 Brick Slips Our Gun injected mortar has been specifically designed to ensure ease of use when being installed using a hand-held mortar gun. The light and pliable texture of Slip-point makes it fast and convenient to work with and the hand-held mortar gun allows intricate areas to be pointed neatly. Whilst this has been designed with Gun injection application in mind it can still be applied by trowel in the traditional way when finishing your Brick Slips. Some of the great benefits of our pointing mortar are;
  • Mixed easily on-site with water
  • Excellent compatibility, and colour consistency.
  • Resistance to freeze/thaw weather conditions - Suitable for both Internal & External uses.
  • Suitable for use around heat sources such as Stoves, Log Burners and kitchen hobs.
  • Shrinkage compensated
  • Fast and easy application
  • Conforms to BS 7533
  • Our Slip-Point pointing mortar comes in a natural grey colour.
  • Each Tub covers 4.25m2 of brick slips when laid in stretcher bond using a standard 10mm x 10mm recessed mortar joint.

    Please note  - Increasing the mortar joint width and depth and jointing style will reduce the coverage.

For More Information on Slip-Point please click here
]]> Brick Slips Our Gun injected mortar has been specifically designed to ensure ease of use when being installed using a hand-held mortar gun. The light and pliable texture of Slip-point makes it fast and convenient to work with and the hand-held mortar gun allows intricate areas to be pointed neatly. Whilst this has been designed with Gun injection application in mind it can still be applied by trowel in the traditional way when finishing your Brick Slips. Some of the great benefits of our pointing mortar are;
  • Mixed easily on-site with water
  • Excellent compatibility, and colour consistency.
  • Resistance to freeze/thaw weather conditions - Suitable for both Internal & External uses.
  • Suitable for use around heat sources such as Stoves, Log Burners and kitchen hobs.
  • Shrinkage compensated
  • Fast and easy application
  • Conforms to BS 7533
  • Our Slip-Point pointing mortar comes in a natural grey colour.
  • Each Tub covers 4.25m2 of brick slips when laid in stretcher bond using a standard 10mm x 10mm recessed mortar joint.

    Please note  - Increasing the mortar joint width and depth and jointing style will reduce the coverage.

For More Information on Slip-Point please click here
]]> Slip-Fix Brick Slip Adhesive Tub 20Kg https://www.slipsfromstock.com/product/slip-fix-brick-slip-adhesive-tub/ Wed, 07 Sep 2022 08:24:06 +0000 https://www.slipsfromstock.com/?post_type=product&p=36698 brick slips to a range of substrates including sand/cement render, brick and block work and can be used for wall and floor applications as well as with external and internal wall installation systems.
  • Ideal for use in all weathers
  • Applied to a thickness of 3mm – 20mm
  • Frost resistant
  • Suitable for: brick slips and brick effect tiles
  • Can be used with external wall installation systems
  • Extended workability
  • Suitable for underfloor heating
  • External / internal use
  • 20kg Tub
]]> brick slips to a range of substrates including sand/cement render, brick and block work and can be used for wall and floor applications as well as with external and internal wall installation systems.
  • Ideal for use in all weathers
  • Applied to a thickness of 3mm – 20mm
  • Frost resistant
  • Suitable for: brick slips and brick effect tiles
  • Can be used with external wall installation systems
  • Extended workability
  • Suitable for underfloor heating
  • External / internal use
  • 20kg Tub
]]> Slip Grab Brick Slip Adhesive 290ml Cartdridge https://www.slipsfromstock.com/product/slip-grab-brick-slip-adhesive/ Mon, 15 Aug 2022 14:49:33 +0000 https://www.slipsfromstock.com/?post_type=product&p=35297 Slip - Grab Brick Slip Adhesive

The fastest and easiest way to install brick slips!

  • No Mixing
  • No Dust
  • No Mess
  • No Waste
  • Super High Tack - Zero Slump
  • Works with all brick tiles
  • High adhesion to damp surfaces
  • Excellent water resistance & UV stability
  • Perfect for small to Medium sized projects
  • Can be used Internally & Externally
Slip Grab has a cure time of 4-6 hours (at 20deg), which gives you the flexibility to make rapid progress when installing Brick Slips. We would recommend this for people who are new to Brick Slip Installing, and also for experienced professionals who want the speed and reduced waste that a cartridge adhesive offers. 1 Cartridge of Slip Grab covers approximately 1m2 of standard UK sized brick slips. If you have a large Brick Slip Project take a look at our Slip-Fix Adhesive as a more cost effective option. To apply this product you will need a standard Caulking gun/ Sealant Gun, these are available to purchase here. MS Polymer Brick Slip & Brick Tile Adhesive]]> Slip - Grab Brick Slip Adhesive

The fastest and easiest way to install brick slips!

  • No Mixing
  • No Dust
  • No Mess
  • No Waste
  • Super High Tack - Zero Slump
  • Works with all brick tiles
  • High adhesion to damp surfaces
  • Excellent water resistance & UV stability
  • Perfect for small to Medium sized projects
  • Can be used Internally & Externally
Slip Grab has a cure time of 4-6 hours (at 20deg), which gives you the flexibility to make rapid progress when installing Brick Slips. We would recommend this for people who are new to Brick Slip Installing, and also for experienced professionals who want the speed and reduced waste that a cartridge adhesive offers. 1 Cartridge of Slip Grab covers approximately 1m2 of standard UK sized brick slips. If you have a large Brick Slip Project take a look at our Slip-Fix Adhesive as a more cost effective option. To apply this product you will need a standard Caulking gun/ Sealant Gun, these are available to purchase here. MS Polymer Brick Slip & Brick Tile Adhesive]]> Pro Primer (5L) https://www.slipsfromstock.com/product/pro-primer-5l/ Wed, 23 Feb 2022 10:53:08 +0000 https://www.slipsfromstock.com/?post_type=product&p=29575

ProPrimer is an Advanced Polymer Primer for Exceptional Bond on Multiple Substrates

ProPrimer is designed for application before bricks slips have been applied, to prime the substrate/walls before applying Slip-Fix Adhesive. We would recommend priming all surfaces before the application of adhesive to ensure a trouble-free installation that will stand the test of time, it is suitable for both Internal and External brick slip installations. Suitable Surfaces;
  • Plywood overlay (15mm min, non-porous)
  • Tile backer boards (porous)
  • Cement faced fibre boards (porous)Concrete
  • Sand/cement screed
  • Concrete brick/block (porous)
  • Hard vinyl tiles (non-porous)
  • Flooring grade asphalt (non-porous)
  • Anhydrite screeds (porous)
  • Tile on Tile (non-porous)*
  • Firm and stable plaster (porous)
  • Plasterboard (porous)
  •  Sand/cement render (porous) * Existing ceramic, porcelain, and natural stone
]]>

ProPrimer is an Advanced Polymer Primer for Exceptional Bond on Multiple Substrates

ProPrimer is designed for application before bricks slips have been applied, to prime the substrate/walls before applying Slip-Fix Adhesive. We would recommend priming all surfaces before the application of adhesive to ensure a trouble-free installation that will stand the test of time, it is suitable for both Internal and External brick slip installations. Suitable Surfaces;
  • Plywood overlay (15mm min, non-porous)
  • Tile backer boards (porous)
  • Cement faced fibre boards (porous)Concrete
  • Sand/cement screed
  • Concrete brick/block (porous)
  • Hard vinyl tiles (non-porous)
  • Flooring grade asphalt (non-porous)
  • Anhydrite screeds (porous)
  • Tile on Tile (non-porous)*
  • Firm and stable plaster (porous)
  • Plasterboard (porous)
  •  Sand/cement render (porous) * Existing ceramic, porcelain, and natural stone
]]> Pro Primer (1L) https://www.slipsfromstock.com/product/pro-primer-1l/ Wed, 23 Feb 2022 10:50:55 +0000 https://www.slipsfromstock.com/?post_type=product&p=29571

ProPrimer is an Advanced Polymer Primer for Exceptional Bond on Multiple Substrates

ProPrimer is designed for application before bricks slips have been applied, to prime the substrate/walls before applying Slip-Fix Adhesive. We would recommend priming all surfaces before the application of adhesive to ensure a trouble-free installation that will stand the test of time, it is suitable for both Internal and External brick slip installations. Suitable Surfaces;
  • Plywood overlay (15mm min, non-porous)
  • Tile backer boards (porous)
  • Cement faced fibre boards (porous)Concrete
  • Sand/cement screed
  • Concrete brick/block (porous)
  • Hard vinyl tiles (non-porous)
  • Flooring grade asphalt (non-porous)
  • Anhydrite screeds (porous)
  • Tile on Tile (non-porous)*
  • Firm and stable plaster (porous)
  • Plasterboard (porous)
  •  Sand/cement render (porous) * Existing ceramic, porcelain, and natural stone
]]>

ProPrimer is an Advanced Polymer Primer for Exceptional Bond on Multiple Substrates

ProPrimer is designed for application before bricks slips have been applied, to prime the substrate/walls before applying Slip-Fix Adhesive. We would recommend priming all surfaces before the application of adhesive to ensure a trouble-free installation that will stand the test of time, it is suitable for both Internal and External brick slip installations. Suitable Surfaces;
  • Plywood overlay (15mm min, non-porous)
  • Tile backer boards (porous)
  • Cement faced fibre boards (porous)Concrete
  • Sand/cement screed
  • Concrete brick/block (porous)
  • Hard vinyl tiles (non-porous)
  • Flooring grade asphalt (non-porous)
  • Anhydrite screeds (porous)
  • Tile on Tile (non-porous)*
  • Firm and stable plaster (porous)
  • Plasterboard (porous)
  •  Sand/cement render (porous) * Existing ceramic, porcelain, and natural stone
]]> Slip-Point Brick Slip & Tile Mortar – White https://www.slipsfromstock.com/product/slip-point-brick-slip-tile-mortar-white/ Wed, 01 Dec 2021 11:15:15 +0000 https://www.slipsfromstock.com/?post_type=product&p=26680 Brick Slip Cladding. Whilst this has been designed with Gun injection application in mind it can still be applied by trowel in the traditional way. Some of the great benefits of our pointing mortar are;
  • Mixed easily on-site with water
  • Excellent compatibility, and colour consistency.
  • Resistance to freeze/thaw weather conditions - Suitable for both Internal & External uses.
  • Suitable for use around heat sources such as Stoves, Log Burners and kitchen hobs.
  • Shrinkage compensated
  • Fast and easy application
  • Works with all brickslips
  • Conforms to BS 7533
  • Our Slip-point pointing mortar come in a natural white colour.
  • Each bag covers 3.5m2 of brick slips when laid in stretcher bond using a standard 10mm recessed mortar joint.
  • You can read more our about Slip-Point here.

    Please note  - Increasing the mortar joint width and depth and jointing style will reduce the coverage.

For More Information on Slip-Point please click here
]]> Brick Slip Cladding. Whilst this has been designed with Gun injection application in mind it can still be applied by trowel in the traditional way. Some of the great benefits of our pointing mortar are;
  • Mixed easily on-site with water
  • Excellent compatibility, and colour consistency.
  • Resistance to freeze/thaw weather conditions - Suitable for both Internal & External uses.
  • Suitable for use around heat sources such as Stoves, Log Burners and kitchen hobs.
  • Shrinkage compensated
  • Fast and easy application
  • Works with all brickslips
  • Conforms to BS 7533
  • Our Slip-point pointing mortar come in a natural white colour.
  • Each bag covers 3.5m2 of brick slips when laid in stretcher bond using a standard 10mm recessed mortar joint.
  • You can read more our about Slip-Point here.

    Please note  - Increasing the mortar joint width and depth and jointing style will reduce the coverage.

For More Information on Slip-Point please click here
]]> Slip-Fix Brick Slip Adhesive https://www.slipsfromstock.com/product/slip-fix-brick-slip-adhesive/ Fri, 12 Nov 2021 13:08:05 +0000 https://www.slipsfromstock.com/?post_type=product&p=25892 brick slips at the recommended application thickness of 3mm. It is specially formulated with extended workability for fixing brick slips to a range of substrates including sand/cement render, brick and block work and can be used for wall and floor applications as well as with external and internal wall installation systems.
  • Ideal for use in all weathers
  • Applied to a thickness of 3mm – 20mm
  • Frost resistant
  • Suitable for: brick slips and natural stone
  • Can be used with external wall installation systems
  • Extended workability
  • Suitable for underfloor heating
  • External / internal use
  • 20kg paper bag
]]> brick slips at the recommended application thickness of 3mm. It is specially formulated with extended workability for fixing brick slips to a range of substrates including sand/cement render, brick and block work and can be used for wall and floor applications as well as with external and internal wall installation systems.
  • Ideal for use in all weathers
  • Applied to a thickness of 3mm – 20mm
  • Frost resistant
  • Suitable for: brick slips and natural stone
  • Can be used with external wall installation systems
  • Extended workability
  • Suitable for underfloor heating
  • External / internal use
  • 20kg paper bag
]]> Slip-Point Brick Slip & Tile Mortar -Natural Grey https://www.slipsfromstock.com/product/slip-point-brick-slip-tile-mortar-grey/ Fri, 12 Nov 2021 12:25:31 +0000 https://www.slipsfromstock.com/?post_type=product&p=25887
  • Mixed easily on-site with water
  • Excellent compatibility, and colour consistency.
  • Resistance to freeze/thaw weather conditions - Suitable for both Internal & External Brick Slips.
  • Suitable for use around heat sources such as Stoves, Log Burners and kitchen hobs.
  • Shrinkage compensated
  • Fast and easy application
  • Conforms to BS 7533
  • Our Slip-point pointing mortar comes in a natural grey colour.
  • Each bag covers 3.5m2 of brick slips when laid in stretcher bond using a standard 10mm recessed mortar joint.

    Please note  - Increasing the mortar joint width and depth and jointing style will reduce the coverage.

For More Information on Slip-Point please click here ]]>
  • Mixed easily on-site with water
  • Excellent compatibility, and colour consistency.
  • Resistance to freeze/thaw weather conditions - Suitable for both Internal & External Brick Slips.
  • Suitable for use around heat sources such as Stoves, Log Burners and kitchen hobs.
  • Shrinkage compensated
  • Fast and easy application
  • Conforms to BS 7533
  • Our Slip-point pointing mortar comes in a natural grey colour.
  • Each bag covers 3.5m2 of brick slips when laid in stretcher bond using a standard 10mm recessed mortar joint.

    Please note  - Increasing the mortar joint width and depth and jointing style will reduce the coverage.

For More Information on Slip-Point please click here ]]>