Sandalwood Fireplace Brick Panels

Sandalwood Brick Fireplace Brick Panels

Installed in minutes our Fireplace brick panels offer a fantastic solution to adding a feature fireplace to your project, allowing you to create a brick effect fireplace.

Our fire place chambers are fire resistant, and are made using an A1 fire rated substrate, genuine clay fireplace brick slips and a cement based adhesive and mortar.

Our Full Fire Chambers comprise of ;

1x Back Panel – 1050mm wide x 1000mm high x 38mm deep

2x Side Panels -450mm wide x 1000mm high x 38mm deep

If you would prefer only the back panel please select this from the variations above.

We strongly recommend using our Slip-Fix Adhesive for the installation of your Fire Brick Panels, this has been tested for longevity around heat sources, and is suitable for application onto the most common fire place substrates. We would always recommend sealing the existing substrate with Pro Prime prior to the application of adhesive.

Fireplace Brick Panels are often referred to as:

• Log Burner Panels
• Fireplace Chambers
• Fireplace Liners
• Inglenook Panels
• Fireplace Boards