Order Free Samples CLICK HERE
Brick Effect Tiles are usually attached to walls using a cement-based adhesive. We supply Slip-Fix Adhesive specifically designed for brick effect tiles. The adhesive is applied to the wall and back of the brick tile, which is then pressed onto the wall surface. The adhesive should be applied using a tile trowel with a depth of 3-6mm. It is important to choose an adhesive that is suitable for the type of wall surface and the environment in which the brick tiles will be installed.
What do you stick brick effect tiles on with? Slips From Stock have specifically designed an adhesive to Stick Brick Tiles to both internal and external walls. As with all of our brick tiles, our adhesive has been tried and tested on both internal and external walls which allows us to offer our customers a 25 Year Warranty.
Slip-Fix Adhesive – This is traditional cement based adhesive and supplied in a powder form. Once mixed with water this adhesive becomes a slurried consistency allowing you to spread it tooth the wall and the brick tiles. It has been designed to work with all of our brick tiles and all surfaces such as plasterboard, cement board, block, brick and wood.
Slip-Fix Tube – This adhesive is designed for those really small projects where a bag or tub of adhesive we prove wasteful. In addition, this is applied slightly differently by using a caulking gun and squirting the adhesive on the back of the brick tiles. This adhesive allows the Brick Effect Tiles to be stuck to all surfaces including plastic and metal.
Slip-Fix Tub – This special adhesive actually works as a 2 in 1 product allowing you to fix the brick tiles and also point the brick tiles within one ready-mixed product. Again ideal for small projects or those looking for a slightly easier and less messy alternative to powdered adhesive.
You can shop our full range of Brick Tiles below. In addition should you need any further advice on What do you stick brick tiles on with. Feel free to get in to get in touch with us.
